QSC PLX2402

23.00

Documentation technique

Description

Spécifications :
Watts Stereo Mode (both channels driven)
8 ohms 20 Hz-20 kHz 0.03% THD 425W
4 ohms 20 Hz-20 kHz 0.05% THD 700W
2 ohms 1 kHz 1% THD 1200W
Watts Bridge Mono Mode
16 ohms 20 Hz-20 kHz 0.01% THD: 850W
8 ohms 20 Hz-20 kHz 0.01% THD: 1500W
4 ohms 1 kHz 1% THD: 2400W
Noise (20 Hz-20 kHz): <-1.8 dB
Input Sensitivity @ 8 ohms: 1.5 Vrms
Input Sensitivity @ 4 ohms: 1.3 Vrms
Output Circuitry: 2-Step
Power Requirements (1/8 power pink noise @ 4ohms): 8A
Distortion (SMPTE-IM) Less than 0.01%
Distortion (typical) 20 Hz-20 KHz (10 dB below rated power) 1.0 kHz and below full rated power: Less than 0.01% THD
Frequency Response: 20 Hz-20 kHz, � 0.2 dB/8 Hz-50 kHz, +0, -3 dB
Damping Factor: greater than 500
Input Impedance: 6 K ohms unbalanced, 12 K ohms balanced
Input Clipping: 10 Vrms (+22dB)
Cooling: Variable-speed fan, rear-to-front air flow
Connectors: (each channel) Input: 3-pin XLR and 1/4 in. TRS balanced
Output: Neutrik Speakon and touch-proof binding posts
Amplifier Protection: Full short circuit, open circuit, thermal, ultrasonic, and protection
Stable into reactive or mismatched loads.
Load Protection On/off muting, DC-fault power supply shutdown
Dimensions: 19 in. (48.3cm) rack mounting, 3.5 in. (8.9 cm) tall (2 rack spaces), 13.25 in. (33.7 cm) deep (from front mounting rails)
Gain: 40x (32 dB)
Weight: 21 lbs. (9.5 kg) net