BOSE L1 model I + sub B1

60.00

Documentation technique

Description

Bose L1 specs

TypeSelf-powered, two-way
Maximum Sound Pressure Level (SPL)115 dB continuous, 121 dB peak
Frequency ResponseFrequency Range (-3 dB): 40Hz – 12kHz
Frequency Range (-10 dB): 32Hz – 14kHz
Crossover Frequency200Hz 24dB per octave
Coverage160° H
Rated Power OutputSystem Power: Handling 500W
Low-Frequency Amplifier: 250W
High-Frequency Amplifier: 250W
Distortion at Rated Power: 0.1% Max 30Hz – 15kHz
System Limiter: Dynamic
Transducerx24 High-Frequency Drivers 2.25″ HF drivers
x2 Low-Frequency Driver 5.25″ LF driver
ChannelsChannel 1&2:
Input: Balanced XLR / 1⁄4″ TRS combo jack with XLR loop through
Insert: TRS line input
Channel Gain: (1/4″ input) -Infinity to +28dB
Channel Gain: (XLR input) -Infinity to +48dB
Max Input Signal: +10dBV (Mic) +18dBV (Line)
Input Impedance: 2.2 kΩ (Balanced) 909 kΩ (unbalanced)
Phantom Power Switch: +24 VDCChannel 3&4:
Line In Unbalanced 1/4″ TS jack
Level Control 20 dB available gain (+2.6 dB at 12:00)
ControlsSignal Indicators: Signal/Clip LED: Green = Signal Present Red = Clip (limiter active)
ToneMatch Switch: This switch engages ToneMatch equalization only to the ¼” input. When set to ON, this engages a preset designed for an acoustic guitar with a piezo pickup. When in the OFF position, no EQ is applied.
Controls: Volume
Inputs: 1/4″ TS/TRS, 1/8″ TS/TRS, x2 RCA
Channel Gain: ¼” = -Infinity to +40dB, 1∕8″ and RCA = -Infinity to +24dB
Max Input: ¼” = +12 dBu, 1/8″ = +12 dBu, RCA = +12 dBu
Input Impedance: ¼” = 800 kΩ, 1∕8″ = 14 kΩ, RCA = 12.5 kΩ
OutputsBass Module Out (for B1 only): NL4 connector (all pins wired for active sensing) Bass output signal for driving one or two B1 bass modules (1 B1 bass module = 8 Ω) (2 B1 bass modules = 4 Ω)
Bass Line Output: E E Post-DSP bass signal output (180 Hz high-pass filter) Accepts a 1⁄4″ TRS cable Supplies low-frequency signal for connecting a PackLite power amplifier or powered sub woofer
PowerAC power rating 100-240 V 50 / 60 Hz
1000 W
Dimensions (HxWxD)L1 Model I Power Stand: 5 x 26 x 26″ (127 x 660 x 660mm)
L1 Model I Cylindrical Radiator Top:
43 x 3.5 x 4″ (1105 x 89 x 105mm)
L1 Model I Cylindrical Radiator Bottom:
43 x 3.5 x 4″ (1105 x 89 x 105mm)
B1 Bass Module: 14.5 x 10.25 x 17.75″ (381 x 260 x 450mm)
WeightL1 Model I Power Stand: 56 lbs. (25.4 kg)
L1 Cylindrical Radiator Loudspeakers: 43 lbs. (19.5 kg)
B1 Bass Module: 30 lbs. (13.6 kg)